Tevo Little Monster Motor Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cap covering the pulley sides of the Little Monster's (or any standard NEMA 17 angled mount's) motors.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 80
- Wydruki
- 1
- Wyświetlenia
- 379
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a cap covering the pulley sides of the Little Monster's (or any equivalent delta printer's) X, Y and Z motors, just to keep dust off the gears and make the printer's look a little less "raw".
Application is easy: Just print it, slide it onto the motor mount, done.
As Tevo uses standard NEMA 17 angled mounts for the motors, the cap will also fit any other NEMA 17 motor with a standard mount.
Print this thing using whatever filament you desire with an infill value of 100. Just for cosmetic reasons, I recommend a matte material and a maximum layer heigth of 0.15 mm.
Also check 3Dvice's Little Monster parking brake: https://www.thingiverse.com/thing:2721009
This is one essential part no Little Monster should be without!