Duct ToolHead Cover Fan Intake Elegoo Centauri Carbon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Duct Fan Intake Horn or Turbine for Elegoo Centauri Carbon
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 274
- Wydruki
- 2
- Wyświetlenia
- 1874
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Duct Air Intake Fan Horn or Turbine for Elegoo Centauri Carbon
Initially this model was purely aesthetic and intention that it affected as little as possible cooling fan capacity. However, after tests and designs these ducts improve airflow slightly when the fan is at maximum speed. Some measurements was taken with a hot wire anemometer around the nozzle comparing with and without duct.
- Models 28mm for original ToolHead cover
- Models 32mm for ToolHead cover Skeletons, Cross, Hex remix *
- Models 34mm for ToolHead cover 5015 remix *
Added more 32mm models
*ToolHeadRemix: https://www.printables.com/model/1400773-remix-elegoo-centauri-carbon-toolhead-cover-update
Tip: For best fit diameter adjustment, you can play with scale in slicer +-2% . If leave a little clearance, the turbine type will rotate with the fan at maximum speed.
Print setting:
0.2 Layer (best adaptive 0.14 smooth 0.5 e.g. )
3 Wall
no supports