Bambu X1C Fan Muffler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another fan muffler for the X1C. Can use 8mm magnets, screws, or both. Prints fine without supports.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just uploading this in case it's useful. I designed this as one of my first experiments with FreeCAD in 2023. I'd also upload the original document, but unfortunately it won't even recompute properly with current FreeCAD releases.
I think my main motivation was that I wanted to use a screw-mounted muffler, but didn't find a model where I also liked the internals. In any case, this one has been on my X1C for more than 2 years now and it's been doing it's job nicely, IIRC I got a 10 dB noise reduction out of it.