100 mm Through Wall Dust hose connector for Laguna Fusion 3 Table saw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces the original 100 mm -> 60mm through hole connector of the Laguna Fusion 3 table saw.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
The model replaces the original 100 mm -> 60mm through hole connector with 100mm → 100mm.
Allows for use of a 100mm hose inside of the machine, together with this:
https://www.printables.com/model/1367636-laguna-fusion-3-table-saw-internal-dust-hood-with/
The original connector has a small hole to collect dust in the bottom of the saw, this does not. This means dust may collect in the bottom of the saw, and needs to be checked and cleared out from time to time.
We are experimenting with a new solution to this. The solution will either be an offshoot on the outside of this, so that a small hose can be connected to a separate through hole, or to add a small hole in the bottom of this connector.
Print instructions:
It can be printed supportless, standing up.
PETG
0.2 mm layer height
3 perimeters
10 infill