1 / 2
100 mm Through Wall Dust hose connector for Laguna Fusion 3 Table saw — image 1
1 / 2

100 mm Through Wall Dust hose connector for Laguna Fusion 3 Table saw

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replaces the original 100 mm -> 60mm through hole connector of the Laguna Fusion 3 table saw.

Rating
0 / 5
Likes
6
Downloads
22
Makes
0
Views
187
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

The model replaces the original 100 mm -> 60mm through hole connector with 100mm → 100mm.

Allows for use of a 100mm hose inside of the machine, together with this:
https://www.printables.com/model/1367636-laguna-fusion-3-table-saw-internal-dust-hood-with/

The original connector has a small hole to collect dust in the bottom of the saw, this does not. This means dust may collect in the bottom of the saw, and needs to be checked and cleared out from time to time. 
We are experimenting with a new solution to this. The solution will either be an offshoot on the outside of this, so that a small hose can be connected to a separate through hole, or to add a small hole in the bottom of this connector.

Print instructions:

It can be printed supportless, standing up. 
PETG
0.2 mm layer height
3 perimeters
10 infill

Tags