1 / 4
Rhino Racing Shark RC Drift Rear ESC Mount 15 degree
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rear esc mount for rhino racing shark final form. uses two 3x6mm or slightly longer screws to mount to rear shock stay.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 229
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Standard Digital File License
Rear esc mount 15 degree angle for rhino racing shark. Uses two 3x6mm or slightly longer button head screws to attach to the rear shock stay.
I printed using sunlu pla with bambu A1 mini standard pla print settings.
Print with the esc mount side down. I used 50% infill, no support.