Sony NP-BD1 Battery Charger (TP4056 based)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
charger for the Sony NP-BD1 camera battery. uses the TP4056 Li-ion charger module
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This model is a custom housing designed to secure and enclose a widely available TP4056 Li-ion battery charger module (03962A) for charging a Sony NP-BD1 battery. The design holds the TP4056 module in a fixed position, with a dedicated slot for the battery.
It was one of my first models created out of necessity. I wish I could find the fusion 360 source files, but all I could find were some earlier versions of the STL renders.
I hope at least something here is useful for someone. The reference-only STLs serve to demonstrate the shape of the battery with all the contact points, and the complete model will accommodate the TP4056 and some hacky wiring for you to make contact points.
Required Electronics/Hardware:
TP4056 Li-ion Charger Module: (Specifically the model with a Mini-USB input, often marked 03962A on the PCB).
Contact Wires/Pins: Small wires or pins are needed to connect the output of the TP4056 module to the positive and negative terminals on the NP-BD1 battery. These connections are physically held in place by the printed plastic part when the battery is inserted. (You will need to solder wires from the module's OUT+ and OUT- pads to the contact points they establish for the battery.)
Assembly Notes:
The positive and negative charging contacts must be correctly positioned to align with the battery terminals.