1 / 3
TZ V6 2.0 WITH V6 NOZZLE Mount for Dragon Burner (Dragonburner 1.8mm offset)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TZ V6 2.0 becomes 1.8mm longer with a V6 nozzle. This offsets the dragon mount by 1.8mm to fix that
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 262
- Wydruki
- 1
- Wyświetlenia
- 1499
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (56)Powiązane
The TZ V6 2.0 becomes 1.8mm longer with a V6 nozzle. This offsets the dragon mount back by 1.8mm to make the nozzle position correct again (see pic).
This makes it incompatible with the original tiny nozzle it comes with since that is too short.
All hardware stays the same since I scooted back the screw indent back too, so you can use the 2.5M screws that come with the TZ to secure it :)
this is for Sherpa Mini mounts, including ProtoXtruder 1.0/2.0/stealth,