Trident Power 15A Inlet Filtered
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified the rear skirt to take a filtered non fused 15A inlet with 16A Rocker Switch
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Needed an inlet that could handle more than 10A and couldn't find one that was fused so decided to take one without fuses and modify the skirt from the Trident CAD to fit a Delta 15GEEG3E into it.
BOM
1 x 15A Inlet without fuses (Digikey)
1 x 16A 125V ZF Rocker Switch (Digikey)
3 x Voron standard heatset inserts
2 x M3x10 FHSC
1 x M3x8 BHSC
(Optional??) Dinkle DK4-TF(5x20) DIN fuse holders for anything that needs a 10A fuse.
Print Settings
Usual Voron print settings but with 2 walls and 15% infill since it's just a skirt and non structural. PLA, PETG, or ABS/ASA are all fine for this.