Baufeng UV5R TypeC charger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Charger design for Baofeng UV-5R standard battery. I use cheap Chinese 2S chargers. Charger size 31.3mm x 18.2mm.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 323
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Charger design for Baufeng UV-5R standart battery.
I m using cheap chinese 2s chargers. Charger size 31.3 mm x 18.2 mm.
For the charging pins I use short pieces of ordinary nickel strip. I solder them to the charger with a short wire. The charger's design includes a cable path for this.
I have to use ABS for printing because the charger gets hot after a while, so the plate bends and there is no contact at the pins.
The side panel doesn't have to be snapped on or screwed on. It needs to be attached with something like super glue.
I hope you enjoy using it.