Cyclonic dust collector

2 versions available : 

• Version 1 (Not fully printed) includes 4 parts :

  • Common parts :

    • “Cyclonic cone”

    • “Karcher WD3 KWD3 Hose adapter” (if you want to plug this hose)

  • “Bell mouth”

  • “Hose clip”

• Version 2 (Fully printed) includes 4 parts too :

  • Common parts :

    • Cyclonic cone

    • Karcher WD3 KWD3 Hose adapter (if you want to plug this hose)

  • “Bell mouth + tube”

  • "Upper plate"

Screws : 

• 14x M3 + 28xWashers + 14 nuts recommended

Mastic sealant : 

• Pattex transparent liquid sealant

  • Grooves are designed in parts to house the seals

If you dont have a WD3/KWD3 Karcher vacuum to plug on it : 

• Feel free to design an adapter based on the D47,98mm (internal diameter) dimension shown in the technical drawing above.

  • Be careful : if your adapter goes too deep in the cylinder, the centrifugal effect will be affected and the dust collector won't work well. 

    • Tip : Reuse the internal shape of the “Karcher WD3 KWD3 Hose adapter.stl” file. Cut this .STL and design your own adapter.

Safety note :

Inhaling sawdust can severely harm your health. I hope this model helps you use your mitre saw more safely. It does not replace an external ventilation and should ideally be used in a well-ventilated area!

Let me know if you notice any modification that could help!