Cyclonic dust collector
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.68 – €0.83 net (excluding VAT)
For file: Hose Clip_0.4n_0.3mm_PETG_MK4_38m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.76 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 37.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
2 versions are available : V1 : "Not fully printed". V2 : "Fully printed".
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 44
- Makes
- 0
- Views
- 480
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
2 versions available :
Version 1 (Not fully printed) includes 4 parts :
Common parts :
“Cyclonic cone”
“Karcher WD3 KWD3 Hose adapter” (if you want to plug this hose)
“Bell mouth”
“Hose clip”
Version 2 (Fully printed) includes 4 parts too :
Common parts :
Cyclonic cone
Karcher WD3 KWD3 Hose adapter (if you want to plug this hose)
“Bell mouth + tube”
"Upper plate"
Screws :
14x M3 + 28xWashers + 14 nuts recommended
Mastic sealant :
Pattex transparent liquid sealant
Grooves are designed in parts to house the seals
If you dont have a WD3/KWD3 Karcher vacuum to plug on it :
Feel free to design an adapter based on the D47,98mm (internal diameter) dimension shown in the technical drawing above.
Be careful : if your adapter goes too deep in the cylinder, the centrifugal effect will be affected and the dust collector won't work well.
Tip : Reuse the internal shape of the “Karcher WD3 KWD3 Hose adapter.stl” file. Cut this .STL and design your own adapter.
Safety note :
Inhaling sawdust can severely harm your health. I hope this model helps you use your mitre saw more safely. It does not replace an external ventilation and should ideally be used in a well-ventilated area!
Let me know if you notice any modification that could help!