IKEA HALLAN cabinet replacement feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable replacement feet for IKEA KALLAN cabinet. Requires 5/16-18 1 inch bolt and nut.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Adjustable replacement feet for IKEA KALLAN cabinet. We have a ton of these and many of the feet were damaged in a move.
Used PLA and 6 shells, 50% infill - holding up just fine.
Requires 5/16-18 1 inch bolt and nut.
18mm square insert - likely fits other cabinets
Not interchangable with the original IKEA feet - you'll have to replace all 4 on the cabinet. Also, a cabinet with these feet will not adjust to level with another cabinet that has the original IKEA feet.
If you can't get the original damaged foot insert out, just drive it up into the tube an inch.
The bolts are a good press fit into the foot.
The nuts need a bit of superglue in the insert.
The insert is a press fit into the cabinet leg. Use a rubber mallet if necessary but don't go nuts - the insert flange will crack if you pound hard on it after it's seated.