Exhaust Plug for Harley Street 750
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is just a basic exhaust plug for a Harley Davidson Street 750. Since the stock exhaust on the Street 750 is oval,…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 447
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is just a basic exhaust plug for a Harley Davidson Street 750. Since the stock exhaust on the Street 750 is oval, this plug is directional. The top is indicated by "TOP" embossed on the side of the plug that should be toward the top.
I've also added a flag to add to the handlebar next to the start button. The street 750 would probably have no problem blowing the plug out when started, but it's best to remove the plug first. This is just a little reminder to remove the plug.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.24mm
Infill:
30%
Filament: Sainsmart TPU Green
Notes:
Print in TPU, add paracord, and insert into cool exhaust with "TOP" towards the top.
Category: Automotive