Track Mounted, Magnetic Lure Keeper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After a day of fishing, I always seem to end up with a bunch of hooks, jigs, and lures scattered around the floor of…
- Ocena
- 0 / 5
- Polubienia
- 46
- Pobrania
- 176
- Wydruki
- 0
- Wyświetlenia
- 1652
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
After a day of fishing, I always seem to end up with a bunch of hooks, jigs, and lures scattered around the floor of my kayak, in my cup holder, and elsewhere. I whipped this up in Fusion 360 to try to help solve this problem.
The magnets in the bottom are 12mm x 3mm neodymium from Home Depot. I roughed up one side with 80 grit sand paper and then just super glued them in. The whole thing is mounted with Yakattack mighty bolts that are secured by 1/4 - 20 nuts held in knurled knobs.
I printed the main box in PETG and the liner in semiflex TPU, but just about any filament should work fine. The liner allows for easy removal of hooks and lures from the magnets so they can be sorted and returned to tackle boxes after they dry. Both the box and liner have drainage holes to try to keep this from filling with water (these may get adjusted after some real world testing).
Happy printing and tight lines!
Category: Sport & Outdoors