TRN Black Pearl Magsafe Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a way to hold my TRN Black Pearl DAC/AMP on the back of my phone, so I created this!
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 279
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted a way to hold my TRN Black Pearl dac/amp on the back of my phone, so I created this!
The tolerances are rather tight, so make sure your machine is dialed in. The DAC/AMP is held in 100% by friction, so the more accurate you are the better it stays. My prints hold it tight even when I shake it, but let it go easily when removed by hand.
The magnets I used came with a Magsafe Pop Socket, but I'm sure these from Amazon would work. To make a cleaner connection, I bought a 180° USB Type-C cable like this one. I would recommend the 7cm version, but your millage may vary depending on your phone size.