Milwaukee Blower 3017-20 Wall Bracket Accessory
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bracket was designed to work with the wall mount designed by DNewGUY.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 132
- Wydruki
- 2
- Wyświetlenia
- 490
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this model to help keep the blower from shifting as well as to reduce the load on the main bracket. It does require some planning to position it correctly - I was able to do this by mounting both brackets to a piece of plywood. First mount the top bracket, lay the plywood on a table, position the blower in the top bracket and then slide the lower bracket into position and mark the holes - I'm sure you get the idea.
I used PETG for my print at 40% infill with no supports. The top side of the bracket was on the print bed.
The top portion of this bracket combination can be found here: