Milwaukee Blower 3017-20 Wall Bracket Accessory
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This bracket was designed to work with the wall mount designed by DNewGUY.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 132
- Makes
- 2
- Views
- 490
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
I designed this model to help keep the blower from shifting as well as to reduce the load on the main bracket. It does require some planning to position it correctly - I was able to do this by mounting both brackets to a piece of plywood. First mount the top bracket, lay the plywood on a table, position the blower in the top bracket and then slide the lower bracket into position and mark the holes - I'm sure you get the idea.
I used PETG for my print at 40% infill with no supports. The top side of the bracket was on the print bed.
The top portion of this bracket combination can be found here: