Home Assistant Yellow case with 40 mm fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modified version of the Home Assistant yellow case with active cooling.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently upgraded my Home Assistant Yellow from a CM4 to a CM5 (It's remarkably easy), but I found it was difficult to keep it cool enough. Since I didn't find an existing design that met my needs, I decided to make one.
⚠ Warning about the fan: I used a 12v fan since I had CRJ headers laying around. You could just as easily use a 5v fan and the existing headers on the board (see the attached photos). Detailed board schematics can be found on HA's github. I used kicanvas to make verifying the files easier (link)
Hardware required
- M3 x D5 x L4 heat set inserts (qty: 8)
- M3 x 6 mm countersunk screws (qty: 4)
- A 40 mm x 10 mm fan
- PC fan screws (qty: 4)
Step and Fusion 360 files included. I printed my case in PCCF just for fun. PLA or PETG would probably be fine.