Home Assistant Yellow case with 40 mm fan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modified version of the Home Assistant yellow case with active cooling.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 30
- Makes
- 0
- Views
- 210
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently upgraded my Home Assistant Yellow from a CM4 to a CM5 (It's remarkably easy), but I found it was difficult to keep it cool enough. Since I didn't find an existing design that met my needs, I decided to make one.
⚠ Warning about the fan: I used a 12v fan since I had CRJ headers laying around. You could just as easily use a 5v fan and the existing headers on the board (see the attached photos). Detailed board schematics can be found on HA's github. I used kicanvas to make verifying the files easier (link)
Hardware required
- M3 x D5 x L4 heat set inserts (qty: 8)
- M3 x 6 mm countersunk screws (qty: 4)
- A 40 mm x 10 mm fan
- PC fan screws (qty: 4)
Step and Fusion 360 files included. I printed my case in PCCF just for fun. PLA or PETG would probably be fine.