Bigscreen Beyond VRGEVR Wall Mount Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for the Bigscreen Beyond headset that attaches to a discontinued wall mount for the Valve Index sold by VRGEVR.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 242
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed to snap onto the tongue of the wall mount over which the Index top strap would be hung.
All parts are designed to be printed without supports.
Print the two halves in the orientation they have in the downloaded files, then flip over the latch half and insert it's tabs into the slots of the saddle half. The parts are purposely designed to fit together tightly and require the curved wings of the tabs to flex. It will likely take a decent amount of force to assemble and may be very difficult to take apart. A rigid yet bendable material like PETG may produce better results than a stiffer, more brittle material like PLA.
If using the version of the saddle with the Bigscreen text logo, position both the Text Cutout and Text Fill models at the same location in your slicer and assign them different materials. If your slicer allows it, you can paint the small square in the Text Fill model to the same material as the saddle, which should cause it to be ignored.