Haasi's Prusa Core One Drybox Updated for Core One+ Spoolholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Frame pieces made 10mm thicker so that the new Core One+ spoolholder can be fitted
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 189
- Wydruki
- 9
- Wyświetlenia
- 1343
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When I printed and fitted the new Core One+ spoolholder, the door would no longer close. I decided to remix the frame pieces and make them deeper to move the window further away and allow the new spoolholder to be fitted and the door to close properly.
I did remix the spoolholder first to make it 10mm smaller, but I then realised that the Prusa USS Drybox probably wouldn't fit, so remixed Haasi's frame parts. All other parts are the same as the original.
These replace the following parts from Haasi:
Frame Upper Left
Frame Upper Right
Frame Lower Left
Frame Lower Right
You will need to download and print all the other parts from Haasi's original model.
Also see my remixed hinges if the door doesn't close properly due to the hinges binding.
https://www.printables.com/model/1333557-modified-hinge-for-haasis-prusa-core-one-drybox-up