1 / 4
Closed Spiral Chrimstas Ball — zdjęcie 1
1 / 4

Closed Spiral Chrimstas Ball

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A fun Christmas ball design that is extremely light (16g).

Ocena
5 / 5
Polubienia
8
Pobrania
77
Wydruki
1
Wyświetlenia
163
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

A fun Christmas ball design that prints well in opaque and transparent/translucent filament. 

I've provided my PrusaSlicer project file and GCODE for a Prusa MK3S+ printer. These are designed for opaque filament. They use 2 perimeters for the bottom 4mm and the top 14mm and 1 perimeter everywhere else. If I were to print it in translucent filament, I'd change the first 4mm to 1 perimeter and increase the print temp a little. 

I didn't use any infill. 

Supports are a must. I used organic supports with an overhang angle of 30 degrees and used a support blocker on the loop at the top. It really doesn't need support. It prints a little better with supports, but it seems a waste of filament and time.

Tagi