Closed Spiral Chrimstas Ball
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fun Christmas ball design that is extremely light (16g).
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 77
- Makes
- 1
- Views
- 163
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A fun Christmas ball design that prints well in opaque and transparent/translucent filament.
I've provided my PrusaSlicer project file and GCODE for a Prusa MK3S+ printer. These are designed for opaque filament. They use 2 perimeters for the bottom 4mm and the top 14mm and 1 perimeter everywhere else. If I were to print it in translucent filament, I'd change the first 4mm to 1 perimeter and increase the print temp a little.
I didn't use any infill.
Supports are a must. I used organic supports with an overhang angle of 30 degrees and used a support blocker on the loop at the top. It really doesn't need support. It prints a little better with supports, but it seems a waste of filament and time.