Flywoo Wide Angle Lens Whoop Canopy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my take on a tiny whoop canopy to accommodate flywoos wide angle lens.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 428
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
This is my take on a tiny whoop canopy designed to accommodate the Flywoo O4 Wide camera. This is currently being used by FPV Manitoba (https://www.instagram.com/fpvmanitoba/) for tiny whoop commercial shoots. It’s a derivative of my TinyWhoop canopy for the DJI O4. The mount is easy to install, eliminates jello, and holds up very well in crashes.
To mount the canopy, leave the camera unmounted at first so you can install the four frame screws. Once the canopy is secured, slide the camera into place. Use M1.4×3 screws to mount the camera (same size as the motor screws).
Note: check out this link for the latest design
Thanks for flying,
Gundy