DeWALT small 5 x hexbit holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DeWALT small 5 x hexbit holder
- Ocena
- 5 / 5
- Polubienia
- 62
- Pobrania
- 305
- Wydruki
- 1
- Wyświetlenia
- 1445
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Small but very useful bit holder. It support 5 hex bits. Need one screw to attach to DeWALT tool. DeWALT tool can be used with it in any position, as bits are catched quite good.
look at update below
Printing
Print without supports. Settings are not critical, but orientation on the printer matters. Look at photo or 3mf file.
My settings are: 15% infill, 3 perimeters, keep fun always on=off, fan speed 20 to 25.
Attached 3mf file if you like to look at.
I do not have yellow PET-G so my prints in light orange ;-)
Files
Mirror_DewaltBitHolderSimpleHitProtection - left positioned if you like it on the opposite side (mirrored in prusa slicer)
Update
I have printed it for my other tools with different filament and it is more fragile then my primary filament.
So i have created hit protective version. Same bit catch mechanics but hidden under protection against hit. This prevent problem from last photo with fragile filament.
Use files with name DewaltBitHolderSimpleHitProtection