1 / 2
IKEA LACK Switch Shroud with Noctua NA-FC1
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A shwitch shroud with a cutout for the Noctua NA-FC1 pwm fan controller.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 933
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 4)Remiksy (0)Kolekcje (28)Powiązane
This is a switch shroud inspired by https://www.prusaprinters.org/de/prints/2263-switch-for-ikea-lack-enclosure.
I needed a cut-out for my Noctua NA_FC1 pwm fan controller.
Also i mounted it on top of the enclosure so the screwholes are at the bottom.
You can easily mount it elsewhere, just add the holes where needed, the F360 file is attached.
The switch cut-outs are for 21x15mm switches like these on Amazon.
You clould change the color after 6mm layer.