1 / 5
Luftfiltergehäuse BMW E30 M52 Motor swap \ Air filter housing E30 M52 engine swap — zdjęcie 1
1 / 5

Luftfiltergehäuse BMW E30 M52 Motor swap \ Air filter housing E30 M52 engine swap

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Nutze dem M52 LMM mit dem alten gehäuse vom M40. Use the M52 LMM with the old housing from the M40.

Ocena
0 / 5
Polubienia
6
Pobrania
53
Wydruki
0
Wyświetlenia
434
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

Beim Motor Swap von einem M40B18 auf einen M52B25 Motor stand ich vor dem Problem den Luftmassenmesser an den Luftfilter zu bekommen. Da der Große Luftfilter vom M30 nicht rein gepasst hat, habe ich kurzerhand selbst etwas für den vorhanden Luftfilter vom M40 konstruiert. Das Model ist im .stp format, falls jemand noch etwas ändern möchte. Gesplittet habe ich das Model im Slicer. Gedruckt habe ich das ganze aus ABS. Und ja, die Wände sind "etwas" überkonstruiert.

Hoffe der ein oder ander kann hiermit was anfangen!!

When swapping the engine from an M40B18 to an M52B25, I was faced with the problem of getting the air flow meter onto the air filter. Since the large air filter from the M30 didn't fit, I quickly designed something myself for the existing air filter from the M40. The model is in .stp format in case anyone wants to make changes. I split the model in Slicer. I printed the whole thing in ABS. And yes, the walls are “slightly” overengineered.

Hope someone can make use of this!

Tagi