Liczymy pasujące modele…
Adjustment kit for the Vanos in BMW engines (M52 and M54) I found the Vanos adjustment measures on BMW forums and made this jig/kit to adjust the Vanos to these parameters. It worked a charm on my engine swapped Z3 who's vanos got out of…
Print at 100% infill with preferably PC or PC-Carbon Blend.
Cap for the round water but
it`s advised to print solid, i printed the adpater in PETG ony because that was what was in the printer PLA i just fine, it took 57Nm to release the fileter cap, and to tool could handle that, filter cap should be tightend to 25Nm
Makita DTM52 wall-mount with added screw holes.
Designed for Makpac size 2 (155mm height outside) Designed in Onshape https://cad.onshape.com/documents/6c8885acbded4393660dad2f/w/ced976dd821b423d755077ca/e/378dd070d238d2d2863483a9?renderMode=0&uiState=63b16e8f08d58430adbfa920
mobile case for galaxy m52 supports needed when you printing at 0,3 0,2 and 0,15 you can print it with hard material or tpe both tested not easy to print with tpe recomending add some object around the hole easy to print with hard…
M52A1 fuse for the 60mm & 81mm Mortar, thread should be correct for real round. How I Designed This Category: Sport & Outdoors
1:32, Gauge 1 scale model of the Deutsche Bundesbahn Omm52 open goods wagon. Materials used: 2 X Axles (LGB, Märklin, Hübner or similar) 4 X Bearings 6.0x3.0x2.5 mm (AliExpress, eBay, etc.) 12 x M2 x 20 mm bolts. 4 x spring 4.5 mm,…
Tool for unscrewing Shimano M520 pedals. Also fits Bontrager Comp Road. ABS print, PETG might also be sufficiently durable.
Gegenlichtblende / Sonnenblende / Störlichtblende / Streulichtblende für das Canon EF 50mm f1,8 II. Gewinde M52 x 0,75. Kann aufrecht stehend mit der großen Öffnung nach unten ohne Unterstützung gedruckt werden. Für den Teil mit dem…
¼ npt port added for turbo feed.
-Funnel for pouring oil into the M54 engine, will also fit the M52 engines and probably the M50. - fits into the hole and holds it in place when pouring. - It will certainly fit other makes and models of cars, but unfortunately I have not…
I have designed a super slim back cover for the Samsung Galaxy M52. Feel free to make one for yourself. It has a small form factor as compared to thick silicon cases. Also, the sides are based on the latest Pixel, S series, and iPhone…
Print it from some flexible material (the softer the better).
-Funnel for pouring coolant into the M54 engine, will also fit the M52 engines and probably the M50. - fits into the hole and holds it in place when pouring. - It will certainly fit other makes and models of cars, but unfortunately I have…
A simple, but effective wall mount for the Dell Pro KM5221W Mouse (the set that comes with nearly every Optiplex)
A simple, but effective wall mount for the Dell Pro KM5221W (the set that comes with nearly every Optiplex)
This is a wall mount to attach the VM5254 Baby Monitor to a wall using Wall Screws and one M4 Nut and Bolt. My second hand baby monitor didn't come with the mount.
I didn't like the camera mounts that came with the cameras since they were kind of flimsy and required me to put holes in my walls. I printed this to use with command strips but you still have the option to use screws.
Fits the M525 mouse and clicks into place. V2 is updated to have an even better fit. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Filament: Hatchbox PLA Silver Notes:…
A pen holder with an M52×5 thread. The chamfer is not a standard bolt chamfer—it’s designed for aesthetics. A perfect Christmas gift. 2025-12-26 Ive added a v2 of the bolt pen holder with bigger tolerances to make the nut fit when 3d…
I included the lens hoods and a small test print for the threads, so you can fine tune the size in your slicer. With tha tests make sure to print them such as the threads ar on the top, so there won't be an issue with elephant's foot.…
Beim Motor Swap von einem M40B18 auf einen M52B25 Motor stand ich vor dem Problem den Luftmassenmesser an den Luftfilter zu bekommen. Da der Große Luftfilter vom M30 nicht rein gepasst hat, habe ich kurzerhand selbst etwas für den…
Gegenlichtblende / Sonnenblende / Störlichtblende / Streulichtblende für das Yashica ML 50mm f2. Gewinde M52 x 0,75. Kann aufrecht stehend mit der großen Öffnung nach unten ohne Unterstützung gedruckt werden. Für den Teil mit dem…
This is an adapter to attach M12 lenses (Board lenses/ S-mount) in front of a camera objective, to work as super-macro. It has a 52mm x 0.75 male thread, that screws into the filter thread of camera lenses. And a female M12 x 0.5 thread…
Created with FreeCAD 0.20.1 and printed on Flashforge Adventurer 3. Printed with PLA 0.2mm layers. Used 4x 6mm countersunk screws to fasten the holder to the wall.
Gegenlichtblende / Sonnenblende / Störlichtblende / Streulichtblende für das 10,5cm f2,5 Nikkor für die Nikon Meßsucherkamera. Gewinde M52 x 0,75 Kann aufrecht stehend mit der großen Öffnung nach unten ohne Unterstützung gedruckt werden.…
Simple wall mount for Makita DTM52 multitool. Not earthquake proof, but keeps it in place on the wall. Plumb walls recommended. Printed in Elegoo PLA+, 0.2 mm layer height, 2 wall loops, 15% infill.
Schraubdeckel mit M52x1,5 Gewinde Für den WiMo GFK Mast 18338 mit 10m Länge. Gegebenenfalls muss beim Druck ein wenig mit der Skalierung gespielt werden. Passt evtl auch auf andere Modelle, das Müsstet ihr aber selbst herausfinden.…
OsVac M32 Vacuum adapter for the sander expansion of the Makita DTM 52 Multitool. Printing recommendation: With support material (tree type), only on the print bed
Da mir die Kabelhalteklammern (M5282, M5292) beim Öffnen von Kabelkanälen meist brechen und Ersatzteile nur schwer, bzw. nur in 50-er Packs zu kaufen sind, habe ich mir für einen 150mm Tehalit Kabelkanal eine Ersatzklammer gezeichnet und…
Made a mount to hold a Vtech VM5267, though any object of similar dimensions would fit.
Generic pack-n-play mount for a VTech VM5267 camera. Tested and works on our Guava Lotus travel crib. It should also work on a Graco or pretty much any pack-n-play. If the mount is too loose, you can stuff a burp cloth underneath to give…
A case to hold the block thread repair kit for head bolts on a BMW M52/M54. The kit shown comes from SpankRanch Garage . This kit built with high quality components, but noticeably more affordable than other commercial options. This case…
Because of the off axis guider the light path for the Samyang 135mm has to be quite short to fit the Fuji X mount I designed an adapter that fits to a M52 reverse macro adapter. I then bought an M52 to Fuji-X mount adapter because I don't…
kleines und großes MAKPAC-Inlay für Makita DTM52 zur sicheren Aufbewahrung von Zubehör. gedruckt in Sunlu PETG Schwarz
bushing to hold injector connectors to the plastic rail, to replace any missing or broken stock ones. Made for m54 / m52tu, might fit others that use a similar design. Printed in TPU for the flexibility, and tpu deals pretty well with heat.
Fuji x reverse m52 mount with extended tube
This tiny adapter slides onto the smooth moving front section of the Svbony SV535 lens and adds a standard 52 mm filter thread (M52x0.75), allowing the use of common photographic filters. The design is intentionally low-profile and…
A more comfortable grip for Innorel M52/M44/M36 Ball Head
This tiny adapter slides onto the smooth moving front section of the Svbony SV535 lens and adds a standard 52 mm filter thread (M52x0.75), allowing the use of common photographic filters. The design is intentionally low-profile and…
1:32, Gauge 1 scale model of the Deutsche Bundesbahn Omm52 open goods wagon. Materials used: 2 X Axles (LGB, Märklin, Hübner or similar) 4 X Bearings 6.0x3.0x2.5 mm (AliExpress, eBay, etc.) 12 x M2 x 20 mm bolts. 4 x spring 4.5 mm,…
