Threaded lens hoods M52, M40.5
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lens hoods for M52 and M40.5 filter threads.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 306
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- GNU General Public License v3.0
I included the lens hoods and a small test print for the threads, so you can fine tune the size in your slicer. With tha tests make sure to print them such as the threads ar on the top, so there won't be an issue with elephant's foot. Same is true for the hoods.
You should print them with black filament, or paint them black after printing, make sure you mask the threads if you will paint them.
The number on the filenames are just made up, I'm not sure what focal lengths are the best fit for them.
Print the threaded parts at 0.12 mm, the bulk of the hoods could even be 0.28 mm. I used adaptive layer height.