1 / 2
HVAC Refrigerant Gauges Christmas Ornament — zdjęcie 1
1 / 2

HVAC Refrigerant Gauges Christmas Ornament

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Scaled copy of hvac refrigerant gauges.

Ocena
0 / 5
Polubienia
19
Pobrania
46
Wydruki
0
Wyświetlenia
332
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

This has been a labor of love building this. I used an actual set of gauges and made the model a 1-1 scale version. The .stl file is 1-to-1 scale but the G-code file is scaled down to 65% as i found that was the ideal sizing for printing and using as an ornament. I only have a single extruder so i made the pieces individual for color printing but then found it was just as easy to just paint the pieces (except for the gauges). If there is interest in releasing a file fully assembled then i might consider do that but i'm not sure how it would print. Leave supports on because they do need them. Also the hook was the biggest pain and i found the best version is if you print with a raft -2 layers-. I used model car glue to assemble and I think it turned out great for my first real design. Lastly with the handles, I wouldn't assemble them until you are ready to glue them on. I found on a couple occasions the attachment point likes to break off the more you put them on and remove them (its a tight fit). I piece of light sand paper is recommended for a perfect fit. The hoses are something I haven't messed with yet simply because i was just going to use color correct electrical wire. There is a hole when the hoses connect to attach something to mimic hoses if wanted. 

Tagi