HVAC Refrigerant Gauges Christmas Ornament
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Scaled copy of hvac refrigerant gauges.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 44
- Makes
- 0
- Views
- 324
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This has been a labor of love building this. I used an actual set of gauges and made the model a 1-1 scale version. The .stl file is 1-to-1 scale but the G-code file is scaled down to 65% as i found that was the ideal sizing for printing and using as an ornament. I only have a single extruder so i made the pieces individual for color printing but then found it was just as easy to just paint the pieces (except for the gauges). If there is interest in releasing a file fully assembled then i might consider do that but i'm not sure how it would print. Leave supports on because they do need them. Also the hook was the biggest pain and i found the best version is if you print with a raft -2 layers-. I used model car glue to assemble and I think it turned out great for my first real design. Lastly with the handles, I wouldn't assemble them until you are ready to glue them on. I found on a couple occasions the attachment point likes to break off the more you put them on and remove them (its a tight fit). I piece of light sand paper is recommended for a perfect fit. The hoses are something I haven't messed with yet simply because i was just going to use color correct electrical wire. There is a hole when the hoses connect to attach something to mimic hoses if wanted.