Multiboard Offset Grid Support Tool (6.25mm & 12.5mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Solid backing tool for installing tight Multiboard pegs on offset-mounted grids. 6.25mm & 12.5mm offsets.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Offset-mounted Multiboards are great, but they introduce one common frustration: when pushing in tight pegs, the grid can flex away from you or press into the wall behind it. That’s where this tool comes in.
What this tool does
Provides a rigid backing surface directly behind the peg hole
Prevents your Multiboard from flexing during peg installation
Protects your wall from accidental damage
Lets you “move” the backing surface to wherever you’re working
Works with all offset mounting hardware (snaps, standoffs, custom offsets)
How to use it
Insert the tool into any grid hole.
Slide it behind the Multiboard.
Align the flat backing face behind the grid near hole you’re working on.
Install your peg — the grid stays rigid, and nothing pushes into the wall.
Included files
Multiboard_OffsetGridSupport_6p25mm.stl
Multiboard_OffsetGridSupport_12p5mm.stl
Both designs are optimized for strength and clearances based on common Multiboard offset dimensions.
Printing Recommendations
This prints cleanly and requires no special settings.
Material: PLA, PETG, ABS
Layer Height: 0.20 mm
Walls: 3–4
Infill: 20–40%
Supports: None
PLA works perfectly, but PETG adds a bit of extra toughness.
Attribution
This is an original design created by me specifically for offset-mounted Multiboard grids.
No remixes, no borrowed geometry.