Gravity Towel Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easily hang and keep your towels off the floor
- Ocena
- 4 / 5
- Polubienia
- 77
- Pobrania
- 679
- Wydruki
- 3
- Wyświetlenia
- 2550
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Gravity Towel Hanger – A clean and minimalist way to hang your towels without having to drill giant holes or using bulky racks.
This 3D-printed design uses nothing but gravity and a trapped 15.5 mm ball to securely wedge your towel in place. Just slide the towel in from the bottom, let the ball drop, and it locks tight – even heavy, wet bath towels won’t budge.
There are two mounting versions.
Screw-mount with sleek wall plate (perfect for permanent install)
Flush-mount backplate for damage-free 3M VHB or heavy-duty double-sided tape (renter-friendly)
I printed with PETG and PLA but PETG is (recommended), this thing is bathroom-proof and the two-piece ball glues together in seconds with CA glue.
No more towels on the floor. No more ugly hooks. Just a tiny, OD-green (or whatever color you want) accent that looks like modern art and works like magic.
Perfect for kitchen, bathroom, gym, garage, or boat.
If you have a 15mm steel bearing would work better then the printed plastic one. It will add more weight and help the hanging process.
**If you use the 2-Way tape version you will be limited on weight and size of towel
I printed with 5 wall perimeters and added cylinder modifiers to the male and female parts where they connect to each other. Then I added infill to 60% to the modifiers. Might be overkill but you can play around and see what works for your application.
ENJOY AND HAPPTY PRINTING!!!!!