1 / 5
MN82 S LC79 Trailer Hitch (tow bar) with steps — zdjęcie 1
1 / 5

MN82 S LC79 Trailer Hitch (tow bar) with steps

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Trailer Hitch for MN82 S LC 79 Toyota RC car

Ocena
0 / 5
Polubienia
23
Pobrania
269
Wydruki
1
Wyświetlenia
1055
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

I adapted the original for the red MN82 (without S) for the model with rear bodywork MN82 S. The body of the “S”-Variant has different dimensions, so the original did not fit. 

I have uploaded two versions. The version shown has a 20° overhang angle, so good cooling is required for good printing results. I have also provided another version with a 40° overhang angle for easier printing. The screw-holes, steps and the trailer coupling require support. 

I printed the model with 0.4 mm nozzle and 0.2 mm layer height for good overhangs. Printed in PLA+ but any material should work.

M2.3 self-tapping screws with 14mm length worked great for mounting.

Tagi