MacMini Mount for Voron 2.4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MacMini Mount for Voron 2.4 with the 3mm Panels.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I kept getting Timer Too Close errors on my RPi 4 with a BoxTurtle. I had a spare Mac Mini that wasn't really being used, so I installed Linux Mint on the machine and used it as the primary Klipper machine. I wanted a way to mount the mini to the back of the machine so I could make moving easy. As I recently installed some leveling caster wheels, this became more important as moving the printer around was tricky at best.
I found the OG mini and the mini fit in it, but I had no way to do the mount owing to the panels on the Voron. Additionally, as I'm also installing a StealthChanger and the relative duct, I didn't have a way to mount the original, so I adjusted the mounts by 90 degrees to mount to around the extrusion. I also added a 3mm bar along the mounts to help line up better with the panels.