MacMini Mount for Voron 2.4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
MacMini Mount for Voron 2.4 with the 3mm Panels.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 58
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Public Domain
I kept getting Timer Too Close errors on my RPi 4 with a BoxTurtle. I had a spare Mac Mini that wasn't really being used, so I installed Linux Mint on the machine and used it as the primary Klipper machine. I wanted a way to mount the mini to the back of the machine so I could make moving easy. As I recently installed some leveling caster wheels, this became more important as moving the printer around was tricky at best.
I found the OG mini and the mini fit in it, but I had no way to do the mount owing to the panels on the Voron. Additionally, as I'm also installing a StealthChanger and the relative duct, I didn't have a way to mount the original, so I adjusted the mounts by 90 degrees to mount to around the extrusion. I also added a 3mm bar along the mounts to help line up better with the panels.