Co Print KCM Riser for Qidi X-Max 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The riser provided by Co Print didn't fit my X-Max 3, so i made a new one.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
As I am waiting for my Co Print KCM Set to arrive, I wanted to print all the parts needed in the mean time. When I tried the original riser provided by Co Print, I was disappointed. It fits my printer but the Lid can't be used anymore because it didn't fit properly.
I was tinkering around with onshape anyway so I decied to make something useful and designed a new riser that fits my printer and allows the lid to fit in safely. As soon as the KCM set arrives I'll try to create a part to seal the enclosure again.
Printed in ABS (0.2mm layer height, 2 walls, 15% grid infill, no supports, no brim)
I printed the parts without support and with no brim, depending on your bed adhesion and material you should consider using a brim.
For those interested in the original model, you can view and export it on onhsape: https://cad.onshape.com/documents/dd81330e7ac4c1c84de24cc2/w/df5fff4de3d60af47cf0fe67/e/8b97996545826c29c1ab9093?renderMode=0&uiState=692d3f4d661a076b20af7016
My workflow was a bit messy, but it was the first time I used the tool.