Kärcher WVP10 Advanced – Water Funnel Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for the water funnel of the Kärcher WVP 10 Adv
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is Part 6 and the final addition to my complete storage system for the Kärcher WVP10 Advanced.
To finish the series, I designed a simple and practical wall holder for the water funnel.
Design Overview
The holder consists of two printable parts:
The Mount
This piece attaches directly to the wall using screws. It provides the base structure for the funnel holder.
The Hook
Designed to hold the funnel securely and neatly. It slides into the mount without tools.
I split the design into two components so everything can be printed without supports, keeping the print clean and easy.
Assembly
As shown in Fig. B.3 (in your upload), once the hook is slid into the mount, you secure the two pieces using a small piece of filament inserted through the locking hole.
This acts as a simple pin to keep both parts firmly connected.
Features
Support-free printing
Both parts are optimized to be printed without any supports.
Easy assembly
Slide the hook into the mount and lock it with a bit of filament.
Wall-mountable
The mount attaches with screws for a stable installation.
Clean and minimal design
Matches the aesthetic of the previous five parts of the WVP10 Advanced holder series.