Tarp Corners with Drawstring or Bungee Cord
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Make affordable, well-fitting and secure Tarpaulins or similar Covers, using even cheap DPM sheet. STL + FreeCAD source.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- GNU General Public License v3.0
Make affordable, well-fitting and secure Tarpaulins or similar Covers.
With these fittings, even cheap DPM sheet can be used.
[Damp Proof Membrane, as used in building foundations to prevent rising damp]
The twin-block design grips the membrane to spread any applied force, reducing the likelihood of tearing.
Unlike a traditional eyelet, they require no special tool, only a screwdriver to fit them.
Standard countersunk woodscrews used for fastening:
- Corner piece Ø 3 x 20 mm (Ø 3 x 16 may suffice)
- Straight piece Ø 3 x 16 mm (Ø 3 x 12 may suffice)
The cord holes are Ø 6mm.
For outdoor use, ASA polymer and stainless screws are recommended.
Printed using 1.6 mm walls and 30% infill, they feel easily strong enough.
Print orientations shown in photos.
Important : When sizing the tarp, allow clearance enough for the inner blocks to pass over the rim of the container.
FreeCAD source model included.