1 / 3
Electrolux hoover part Cyclonic Ultraperformer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the pivot part of the brush and his cover
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Hello,
I make this part to repair my hoover. So if you have the same braked part, i share my model with you.
The main part is print horizontally for more solidity, the cover can be print vertically.
You can print with ABS, but i try with PLA870 and the result is better. I use raft and supports, filling 100%, layer 0.1. PLA PETG is ok for the cover.
To insert the cover you may cut or adapt some details because it fit very very just. Sorry I don't have time to modify the model. However it works very well.
let's print !