1 / 3
Electrolux hoover part Cyclonic Ultraperformer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the pivot part of the brush and his cover
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 17
- Makes
- 0
- Views
- 258
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Hello,
I make this part to repair my hoover. So if you have the same braked part, i share my model with you.
The main part is print horizontally for more solidity, the cover can be print vertically.
You can print with ABS, but i try with PLA870 and the result is better. I use raft and supports, filling 100%, layer 0.1. PLA PETG is ok for the cover.
To insert the cover you may cut or adapt some details because it fit very very just. Sorry I don't have time to modify the model. However it works very well.
let's print !