Reinforced Christmas Tree Repair Kit (31 mm Pole) – Base, Legs & Branch Collars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A full set of 3D-printed replacement parts to repair and reinforce artificial Christmas trees with a 31 mm central pole.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This project was born after my aging artificial Christmas tree started showing its battle scars, so instead of buying a new tree… I let the printer take over.
This reinforced, modular repair kit is designed for artificial Christmas trees that use a 31 mm central pole (measured on my tree—yours should match or be very close).
Included parts
Branch collars (two variants):
• 6-branch version
• 8-branch version
The two halves can be attached together and to the pole with M3 screws and nut.
Modular central base
Compatible with 3 or 4 legs,
Reinforced legs
Triangulated structure to handle significant weight and maintain stability.
Each leg is compatible with adjustable M8 leveling feet.
Pole-centering insert
Keeps the 31 mm pole perfectly vertical and eliminates side-to-side wobble.
Recommended print settings
Material: PETG
Infill: 30–40%
Layer height: 0.3 mm
