DIY Ultralight Toolhead (Ratrig VCore MFBS FFGM)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
WIP DIY printable version of the MFBS Ultralight toohead. Uses stock Rapido/UHF and Induction probe.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 336
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
DIY 3d printable Ultralight toolhead. Original MFBS SLM versions and gantry mod here
BOM:
Rapido UHF (HF could also work using stock nozzles)
Orbiter 2.5
2 x M2x6 button head screws for saddle. (Any longer than 6mm will hit the x beam)
Selection of M3 Heat inserts
1 x M2.5 nut and bolt for probe
6 x M3x6 countersunk screws.
2 x M3x30 countersunk screws.
Changelog
21/12/25 - Increased holes slightly to allow for easier fitting of screws/heat insert ; minor re design of x endstop mount, can be fitted with heat inserts or screwing direct with m3x6. Increased bore angle on countersinks for m3 x 30 screws.
01/01/2026 - Adjusted z probe hole position to create a thicker front wall. Previous 0.5 wall wasn't easy to print.
08/01/25 - Small changes to part cooling ducts.
11/01/2026 - Added Beacon Version of Toolhead
24/01/2026 - Added better ducts. Thanks to @mfbs for drawing these up.
22/08/2026 - STEP files added - Need some shrouding added to deal with clogging issues on longer prints, particularly when printing PETG. Fan isn't very efficient at hitting the rapido heatsink on its own. With the metal MFBS version the entire alu carriage acts as a heatsink.