Extended Sturdy rear slab shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed slab shroud to connect to toprail mount to make it sturdier and provide more rail space while still looking nice
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed rail B section of the SLAB rail heat shield. Installs with the same screws used everywhere in the SLAB with the two holes designed for the small top rail. will still require the rest of the shroud from here https://www.printables.com/model/308896-slab-shroud . Has a 2 degree angled and flat version, but if you have a long barreled setup the 2 degree angled version might not be too useful without a riser as well
Print the same way you would the others with the flat end down, will probably need supports but feel free to try without them and share how that goes