Modified parts to accommodate DIN 934 nuts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified parts to use DIN 934 m3 nuts, instead of 562.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original model was great! However, I did not have DIN 562 nuts; I have A LOT of DIN 934 nuts instead. Therefore, I modified the Top, Bottom, and FrontBack connectors to accommodate DIN 934 M3 nuts. The nut openings are now 3 x 5.7 mm, and you can easily use regular M3 nuts.
Additionally, the blade was not always dropping smoothly. I happen to have a box of M5 metal rods with various lengths. The M5 x 30 mm ones were the longest that could fit. Therefore, I modified the knife holder to add chambers for a few metal rods. The metal rods will add weight, making the drop smoother. However, printing them vertically will cause the two parts to close less tightly than before, so I also made the edge thinner.