Modified parts to accommodate DIN 934 nuts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified parts to use DIN 934 m3 nuts, instead of 562.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The original model was great! However, I did not have DIN 562 nuts; I have A LOT of DIN 934 nuts instead. Therefore, I modified the Top, Bottom, and FrontBack connectors to accommodate DIN 934 M3 nuts. The nut openings are now 3 x 5.7 mm, and you can easily use regular M3 nuts.
Additionally, the blade was not always dropping smoothly. I happen to have a box of M5 metal rods with various lengths. The M5 x 30 mm ones were the longest that could fit. Therefore, I modified the knife holder to add chambers for a few metal rods. The metal rods will add weight, making the drop smoother. However, printing them vertically will cause the two parts to close less tightly than before, so I also made the edge thinner.