1 / 3
Halter für Akustikpanel / holder for acousticpanel — zdjęcie 1
1 / 3

Halter für Akustikpanel / holder for acousticpanel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

0,14 € – 0,17 € netto (bez VAT)

Dla pliku: akustikpanel_halter_13mm.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,16 € netto (środek widełek).

Masa podana przez autora
2 g
Czas druku podany przez autora
9,6 min
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Praktischer Halter der nur geklemmt wird und keine Schäden hinterlässt

Ocena
5 / 5
Polubienia
15
Pobrania
53
Wydruki
0
Wyświetlenia
431
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Der Halter ist für 13mm und 20mm Spaltmaß ausgelegt.

Ich habe ihn aus PETG gedruckt ohne Supports.

Einfach einsetzen mit erhöhtem Haken und diesen anschließend nach unten drehen. Jetzt hällt der Halter fest in der Wand und ein Bild oder ähliches kann aufgehängt werden. Zum demontieren Haken anheben und schon löst sich der Halter ohne Spuren zu hinterlassen.

Viel Spaß beim Drucken.

The holder is designed for a 13mm and 20mm gap.

I printed it in PETG without supports.

Simply insert it with the raised hook and then turn it downwards. Now the holder is fixed to the wall, and you can hang a picture or similar item. To remove it, lift the hook, and the holder comes off without leaving any marks.

Happy printing!

Tagi