Spice and Rub Caddy for 70mm jars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Caddy for Spices and Rubs, 70mm diameter jars. Has a handle. Looks vaguely like a surprised frog.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Update: Now with a "Mini" version, which will be printable on smaller printers.
This is a simple caddy to store my spices and rubs. This was modelled for jars that are 70mm in diameter, though smaller jars do seem to sit in it well enough. However, I will make another one for the smaller jars eventually.
My goal was to have a low friction tray that could act as a carousel, without being round, so I could use the space more efficiently. The large jars slide along the tracks so it is easy to rotate the selection while it is in the pantry. I also wanted it to be easy to handle if I needed to get it out. So it has a handle.
For a quick model, it came out pretty well.
The handle is a bit of a bridge, but I printed it without supports and it came out ok. I recommend a higher bridge density, or high flow rate mulitplier which can greatly improve the quality of the bridge.
Standard model is ~460mm long. Mini is ~315mm.
Printed in PLA, .8mm nozzle.