Flexible AA to C-Cell battery adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A complete re-think of this design; a very flexible (every sense of the word), lightweight, economical part
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
An AA cell is the same length as a C cell, but obviously a smaller diameter. Often the device using C cells doesn't really need the large capacity of C cells, and anyway rechargeable AA's are relatively inexpensive. So here's a neat way to power those devices needing C cells, without having to purchase those relatively expensive (and hard to find ) cells.
This is designed to use as little plastic as possible and to suit all AA cells. Depending on your device, use 2 or maybe 3 of these on each AA cell to replace a C-cell.
Probably best with PETG rather than PLA because of the need for the 'spring' to remain fairly tight.
Recommend using a brim since contact with the bed is only a small area.
Each part is 10mm high.
I also provide a 'full size' AA cell sleeve (45mm) if that is your requirement. I've not printed this part.